Product Spotlight: Gentex 7139CS-C Single/Multiple Station Smoke Alarm

Gentex 7139CS-C Single/Multiple Station Smoke Alarm

Ideal for commercial residential applications, the 7139CS series from Gentex remains a popular option for those buildings requiring compliance with ANSI/UL, IBC/IFC/IRC and NFPA Standards.

These smoke alarms are photoelectric in sensing, meaning they use a light beam to detect smoke, which is deemed more effective at sounding when fire develops from a smoldering source according the NFPA.

Where both audible and visual alarms are required, the 7139CS fits the bill with it’s visual signaling appliance, designed to give early and reliable detection of smoke. Included is a 9-volt battery backup to the 120 VAC power requirement. The 7139LS version includes a 9-foot power cord, making this version completely portable.

Once activated, the 7139CS(LS) models will initiate a 90 dB audible signal along with a high intensity strobe that flashes once per second at 177 candela.

Other features include:

· Form C Relay contact for remote annunciation
· A patented 3-position test switch.
· A horn frequency of 3100Hz
· Nominal 2.5% Sensitivity
· 5:1 Signal to Noise Ratio
· Warranted for 1 year from date of purchase


These and several other Gentex photoelectric smoke detectors are now available at E-Controls.net, your online source for building automation supplies. We offer complimentary UPS Ground Shipping on orders over $100. Visit us today at www.e-controls.net or call toll-free at 866-215-4043, or reach out to us via email at support@e-controls.net.

Setra Lite™ Series Makes Monitoring Room Pressure Simple!

The Setra Lite™ Series

Introducing the easiest, most basic room pressure visual monitor that will find out there!  Setra Systems has developed this simplified solution with their new LITE series; green means “good to go” and red indicates an alarm.

The bright light ring on the monitor is clearly visible from a distance and varying angles.  The pressure value on the digital display allows for always-on or momentary indication, and a Positive or Negative room mode.  

It's as basic as it gets with the status and alarm indications.

Designed to install neatly within a single gang electric box, the Lite provides a visual representation of the pressure by way of Setra’s capacitive pressure sensor.  The Lite canalso integrate with your building management system via an analog output for pressure signaling.  It also includes connectivity to the Setra FLEX™ Environmental Room Monitor.  Most notably, the Lite was designed to replace the previously burdensome “ball/tube through wall” pressure indicators.

Typical applications for the Setra Lite include sterile processing and storage, laundry services, hospital room monitoring and infectious control. 

The unit can be configured for 7 different transducer ranges and boasts and accuracy of +/- 0.5%.  It is now available at E-Controls.net, where we offer complimentary UPS Ground Shipping on qualifying orders. E-Controls.net, your online source for building automation supplies. 

FLASH SALE! The Inovonics EN1723 Dual Input Temperature Transmitter.

Inovonics EN1723: Dual Input Temperature Transmitters.

Inovonics EN1723

This single device offers internal measurement for monitoring ambient indoor temperature, while enlisting external thermistor options, user selectable to the needs of your application.  Several key features include:  

• Periodic measurement transmissions or upon drastic changes
• 10 second to 30 minute transmission intervals
• Internal measurement range from -13 to 140° F, External -22 to 212° F
• High accuracy of 0.8°F at room temperature
• Offered in 3 MHz frequencies ranges
• Runs on the EchoStream ® platform

***RIGHT NOW, we are running a special, offering the Inovonics EN1723 for $57.49 each, (normally $66.67). Sale ends 9/24/21!***  Product will drop-ship from Inovonics within 3 days of an order. 

https://www.e-controls.net/inovonics-en1723-dual-input-temperature-transmitter.html

Inovonics is the commercial leader in high performance wireless sensor networks.  Their products are be found in several markets such as multi-family submetering, senior living communities, commercial monitoring and the commercial fire and security industries.  Their high-power repeaters and receivers and gateways with EchoStream ® technology permit integration of various software head-ends and application-specific hardware.

Shop for all of your Inovonics needs, or any other building automation supplies at E-Controls.net!

“Sense the Difference” with Senva’s AQO Series for Outdoor Air Quality.

 

Senva Sensor's AQO Series 

Ideal in measuring outdoor air quality elements for the optimization of heating, cooling and humidity control, Senva’s AQO series offers many benefits to your building’s efficiency.

The AQO sensors provide integral data on outdoor air conditions such as CO2 level, relative humidity and temperature from one outdoor rated enclosure, and in both analog and BACnet communication formats. Other features include an integrated set-point relay, field replaceable RH and NDIR CO2 elements, and a new dual channel CO2 element, ideal for greenhouse applications.

Furthermore, the AQO is tailored to meet your unique project requirements.  Select one, two or all three of the different sensing mechanisms and type (for temperature).  They also feature a LCD of all parameters for ease of install.  Included is a provision to offset CO2 reading +/-250 ppm, selectable auto-calibration mode returns sensor to baseline values.  The enclosure is gasketed with set-screw. 

Best of all, Senva offers their industry leading 7-year limited warranty / 2-year RH element / 3-year CO2 element warranties.

If you are in the market for Senva Sensors, E-Controls.net has you covered!  We are your source for online building automaton supplies and we offer a wide variety of solutions from Senva Sensors.  How does FREE Ground Shipping sound?  We offer that on all orders over $100.00.

www.e-controls.net 

Call us toll-free at 866.215.4043

 support@e-controls.net.

Greystone’s TE200B Series Replaced By TSAP Series

 

Several lines of Greystone Energy’s temperature products have been redesigned and released throughout the past year with new enclosures and new features.  These changes have prompted new model numbering across their catalog.  The popular TE200B Series of duct mounted temperature sensors previously employed a round ABS enclosure which has been updated with the hinged box-type enclosure, or TSAP Series.

The TSAP Series All Purpose Duct/Immsersion Temperature Sensor 

The TSAP all-purpose, single point temperature sensor is encapsulated in a 6 mm, 304 series stainless steel probe.  They are offered in lengths of 4, 6, 8, 12 and 18”.  These probes offer impressive heat transfer, quick response and resist moisture penetration.  The compact ABS enclosure with a hinged and gasketed cover is provided for ease of installation. 

For Duct applications:  Probes are installed in side of duct for single point temperature monitoring with the duct.  Note: Probe length needs to span the duct width. Install in straight section of duct with acceptable distance from any humidification, cooling or heating devices.

For Immersion applications: Probe needs installation in proper length thermowell determined by pipe size. For more information on use of conductive compound for thermal transfer, and types of thermowells needs per application, please refer to the installation instructions for the TSAP Series.

E-Controls.net now offers the TSAP series with a variety of thermistors to choose from.  Searching for the retired TE200B part numbers in our web-store will take you directly to the equivalent TSAP part result.  If you have any questions please contact our team, support@e-controls.net, or call us toll free at 866-215-4043.  We are currently open Mon-Fri, 7:30am to 5:30pm CST.

Inovonics Specialty Sensors: Detection simplified for innumerable applications.

 

Inovonics Commercial Security Wireless Solutions Featuring EchoStream® Technology 

Need to detect occupancy or movement in a low traffic area with false alarm immunity?  Have a project requirement for glassbreak detection at windows and doors?  Would a billtrap transmitter benefit your financial or retail environment?

Inovonics use of their patented EchoStream® network technology enables the connection to nearly any security/monitoring system, while offering a direct interface with most industry-leading control panels, made possible with their boundless selection of transmitters.

The Inovonics EN1262 Motion Detector with Pet Immunity was specifically designed to reduce alarms triggered by animals.  The use of PIR advanced signal processing allows the detector to be used in residential and low-traffic environments with less than one hundred activations a day.

The Inovonics EN1247 Glassbreak Detector Transmitter provides immunity to false alarms and enlists the ShatterPro II Pattern Recognition Technology™ for delivering an extended range (20’ radius, 360° coverage).

The Inovonics EN1249 Billtrap Transmitter provides the necessary flexibility in any retail or financial application that involves cash drawers.  Featuring two alarm transmission modes (2 and 10 second delays), the transmitter is equipped to reduce false alarms.

Inovonics was founded in 1986 and patented the utilization of 900 MHz technology in their products. The result was the creation of flexible wireless solutions, while maintaining cost-effectiveness for a wide variety of applications.

E-Controls.net offers the full line of Inovonics innovative products.  Lead-times may vary, but most products ship within 3-4 days.   Visit E-Controls.net for all of your building automation supply needs!

Choose the Veris E5x Series, it's your versatile energy monitoring solution.

Veris Industries E5x Series, model E51H5

Produced by Veris Industries, the E5x series of Advanced Power Meters boasts simple installation and exceptional performance. Together, these qualities create a cost-effective power monitoring solution for a variety of applications.

Options offered include Modbus, LON, and BACnet outputs, making it flexible for system integration.

Versatile input capabilities feature Control power (AC) 50/60 Hz, 5 VA max, 90 V min.  Control power (DC) is 3W max.  Current input offers Scaling 5 A to 32k A.  Input range 0 to 0.333 V or 0 to 1 (selectable). 

The E5x Series provides a wide CT compatibility (w/ CTs from 5 A to 32k A), can be installed on standard DIN rail or surface mounted as needed, and also features data logging capability (E5xC3 and E5xx5), which protects data during a power or communication error at other source in the system. 

Applications suitable for the E5x Series include

·         Energy monitoring in BAS

·         Commercial sub-metering

·         Monitoring loads that use regenerative braking

·         Industrial monitoring

·         Cost allocation

·         And Energy Management

All Veris products offer a 5-year warranty.

You can find this and much, much more at E-Controls.net, your online source for building automation supplies.

Honeywell Analytics 301-C for centralized gas detection monitoring.

Made for the continuous monitoring and controlling of toxic and combustible gases as well as oxygen hazards, Honeywell Analytics' 301-C Controller boasts simple operation, flexibility and installs easily.

Honeywell Analytics 301-C

Simple Operation: The controller offers complete zoning options, permitting the comparing and averaging of multiple sensor readings.  The biggest benefit of zoning is that brief, localized fluctuations detected at a single transmitter will not activate relays.  This is key when trying to reduce the run time of fans. Operations costs are reduced because of this, as savings are yielded from both decreased normal wear and energy consumption.

The 301-C enlists the management of 3 Modbus channels, which allows the connection of up to 96 wired transmitters.  Maximum operation and flexible control is achieved with the ability of the transmitters to be assigned to an unlimited number of zones.

Flexibility: The 301-C is also available with optional BACnet/IP connection, interchangeable transmitters for detection of different gases, with programmable time delays and integrated time clock for schedule of operations.

(301-C Datasheet link here)

Installs Easily: The 301-C utilizes an addressable RS-485 Modbus communication protocol, and daisy chain wiring that requires just 2 pairs of wires connecting 96 or less transmitters on 3 input channels.  The interface is user friendly and the controller requires no maintenance.   It also features an automatic, quick “self-test” and warm up with continuous alphanumeric display.

Select the 301-C for your gas detection monitoring needs.

E-Controls.net offers the 301C Controller and it ships directly from the Honeywell factory in Lincolnshire, IL.  Current lead-time is approximately 10 days to ship.  

Shop E-Controls.net for all of your Honeywell Analytics Gas Detection needs.